Connecting MaestroDMX To Your Device (PC, Tablet, Smartphone)

You can connect to the MaestroDMX Web App either over its dedicated WiFi network or via a hardwired ethernet connection.

Wireless Connection

After the MaestroDMX™ is powered on it will serve up its own network with the SSID: Maestro-XXXXXX. Your MaestroDMX™ unit will have a unique string of 6 characters to replace the XXXXXX.

SSID: Maestro-XXXXXX
Network password: mymaestro

Known WiFi Connection Issues

IMPORTANT: It is not recommended to rely on a direct WiFi connection to the MaestroDMX unit for performances where a persistent connection to the unit is required. Noise in the RF environment may cause disconnections. For a more reliable connection use:

• Hardwire Ethernet Connection (preferred)

• Connect MaestroDMX & your device (laptop, tablet etc) over WiFi to the network of a 3rd party router with a strong signal. See ‘Wifi’ and ‘Network’ pages under ‘Settings’ on the Web-App.
  
  
  

Connecting to the MaestroDMX Web App using WiFi

Hardwire Ethernet Connection

A hardwire connection can be established via ethernet by entering the following settings into your LAN

•  IPv4 Manual Connection
•  IP: 10.0.0.XX (XX can be anything EXCEPT .200 and .1, for example, 10.0.0.61 is fine)
•  Subnet Mask: 255.255.255.0

Note: the process to do this will differ depending on the operating system type and version. Please consult your operating system’s relevant documentation.

Connecting to the MaestroDMX Web App via ethernet

1.

2.

3.

4.

5.

6.

Your MaestroDMX™ is now prepared and ready for configuration using the MaestroDMX Web App.